|
Camaro
Stock Air Filter Box Cover
PART#CMAB217
INSTALLATION INSTRUCTIONS
PARTS INCLUDED:
1-Stainless Factory Air Box Cover
1-Adhesive Promoter Pack
Your
new cover comes with a protective liner; do not remove liner until
installation is complete.
-
Thoroughly scrub
clean the top surface of the factory air filter box with alcohol
to remove any and all road grime and dirt. Then swipe the entire
cleaned area with the adhesive promoter provided.
-
Before you
permanently attach the new cover set it in place to get
acquainted with its position and also to see where you may need
to gently hand form the panel to contour to the shape of the
factory cover. This contouring will be very mild and will be
easy to achieve by gently shaping the panel by hand until it
sits perfectly onto the factory air box without forcing any part
of into lay flat.
-
Once the panel fits
just right simply peel the red release liner from the back of
the unit and then carefully and slowly set the panel into
position and then press firmly to set. Remove the protective
liner to finish the installation.
 |
