|
CAMARO STAINLESS GAS CAP TRIM
PART# ACC-CMGC-870-881
INSTALLATION INSTRUCTIONS
PARTS INCLUDED:
1-Stainless Gas Cap Trim w/tape
1-Adhesive Promoter Tube
Your new bezel is
designed to fit on your factory gas cap.
-
Clean the
painted area of your factory gas cap with household rubbing
alcohol to remove any dirt and wax. Then swipe the area to be
mounted once with the adhesive promoter tube provided.
-
IMPORTANT:
Before permanent installation carefully place the new stainless
bezel into position to check the shape of the cover. Make sure
the overall shape of the new cover matches the shape of the
curve of the car. It will be necessary to gently form the bezel
by hand until you have achieved a nice perfect conformed fit to
your cars curve without forcing. At this time you will need to
make note of just how the cover sits in place making sure it
sits nice and centered around your gas cap.
-
Peel the red
release liner from the back of the stainless trim and carefully
set it evenly around your factory gas cap and press firmly to
set.
DO NOT GET WET FOR 24 HOURS. |
