CAMARO Door Sill
PART# CMRD502
INSTALLATION INSTRUCTIONS

PARTS INCLUDED:

2-Stainless Deluxe Doorsills

2-Packs of Promoter

PLEASE NOTE If you take your door sills off after they are mounted, although it should not damage your car, it will damage or destroy the door sills.     

Your new doorsills come to you with a protective liner. DO NOT remove the liner until installation is complete. 

1. Thoroughly clean the sill area to be mounted first with soap and water then again with household rubbing alcohol to remove any and all dirt, oil and waxes.
Take each door sill (without removing the backing) and set it on your car threshold to see how it lines up. The correct position of the new sill should set centered onto the factory plastic doorsills. Once you are familiar with exactly how it fits move to set 2.

2.  Swipe the areas where the door sill will mount once with the adhesive promoter provided.

3.  Now that you are familiar with the correct position of your new doorsills simply peel the red release liner from the back of the new sill plate and carefully and gently place it into position.  Important do not let the back of the door sill touch any part of your car until it is in place.  Very gently set the sill place down in place.  Make any last minute tiny adjustments.  Now press firmly all over the surface of the door sill to ensure a good even bond.

4.  Repeat process for opposite side.