A division of Hot Car Accessories, inc.

STAINLESS EXTERIOR BADGES
INSTALLATION INSTRUCTIONS

 PARTS INCLUDED:  2pc Stainless Badge Set;  1-Adhesive Promoter Tube 

Your badges are designed to be used on the exterior surface of your car and can be placed to any flat surface that you choose. 

1. Clean the area to be mounted with household rubbing alcohol to remove any wax and dirt then swipe the area once with the adhesive promoter tube provide.
    

2. Place each badge into position to familiarize yourself with each placement before removing the liner. It MAY BE necessary to HAND FORM the badges  to CONFORM to the shape of the car doing this will prevent any possibility of the badge popping loose or lifting long term. 
    

3. Once they are fitted properly peel the release liner from the back of each badge and carefully set them nice and evenly to your car. Press firmly to set.

 DO NOT GET WET FOR 24 HOURS.

 IF ANY QUESTIONS OCCUR DURING INSTALLATION PLEASE CONTACT AMERICAN CAR CRAFT AT 727-861-1500.