|
CAMARO SS ENGINE SHROUD SIDE DRESS UP KIT
PART # CMST201
INSTALLATION INSTRUCTIONS
PARTS INCLUDED:
23-Stainless Trim Pieces
1-Adhesive Promoter Pack
1-Adhesive Promoter Tube
This
new kit has been designed to fit to the sides of the factory Camaro
SS full engine shrouds simulated coil packs.
-
Thoroughly scrub the
sides of the factory shroud and be sure to clean all the
recessed diagonal recast holes with household rubbing alcohol.
-
Swipe the entire
areas to be mounted with the adhesive promoter provided.
-
Peel the release
liner and set all the small circles into their recesses.
-
Gently shape each of
the square covers so that they contour nicely to the shape of
the factory cover.
-
Once you have
achieved a nice contour simply peel the release liner from the
back of each square piece and carefully line them up with the
factory shroud and press them firmly in place at all eight
locations.
 
|
